Maxtron DEO SAE 10W-30

Make: CATERPILLAR
Model: 304C CR (Mini Hydraulic Excavators)
Engine: D

Application	Recommendation		Capacity (gal)
Engine (D) (Caterpillar S3Q2)	Premium	Maxtron DEO SAE 10W-30 (a, b, c, d, e)	1.85
Engine (D) (Caterpillar S3Q2)	Mainline	Superlube TMS SAE 10W-30	1.85
Transmission	From Hydraulics
Coolant	Refer to Technical (f)		2.91
Hydraulics	Indol EH ISO 46 (g, h, i, j)		12.7
Grease Points	Maxtron EP NLGI 2
Final Drives (each)	Maxtron GL 75W-140 (k, l, m, n)		0.264
Track Roller Frame Pivot Bearings	Premium	Maxtron Power Transmission Fluid MV (o, p, q, r)
Track Roller Frame Pivot Bearings	Mainline	Power Transmission Fluid SAE 30
Track Roller Frame Recoil Spring	Premium	Maxtron Power Transmission Fluid MV (s, t, u, v)
Track Roller Frame Recoil Spring	Mainline	Power Transmission Fluid SAE 30

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: 0°F to 104°F
c.: Alternative recommendations, -40°F to 104°F: Refer to Technical
d.: Alternative recommendations, -22°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, 14°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
f.: Mix ratio, 50% >-37°C
g.: 23°F to 113°F
h.: Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
i.: Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
j.: Alternative recommendations, 32°F to 122°F: Refer to Technical
k.: -22°F to 113°F
l.: Alternative recommendations, -22°F to 104°F: Maxtron Enviro-EDGE GL 75W-90
m.: Alternative recommendations, -4°F to 104°F: Maxtron Enviro-EDGE GL 75W-90 / MP Gear Lube SAE 80W-90
n.: Alternative recommendations, 14°F to 122°F: Maxtron GL 75W-140 / MP Gear Lube SAE 85W-140
o.: -4°F to 77°F
p.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
q.: Alternative recommendations, 14°F to 104°F: Refer to Technical
r.: Alternative recommendations, 32°F to 122°F: Power Transmission Fluid SAE 50
s.: -4°F to 77°F
t.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
u.: Alternative recommendations, 14°F to 104°F: Refer to Technical
v.: Alternative recommendations, 32°F to 122°F: Power Transmission Fluid SAE 50

Oil Change Intervals

Engine (D) (Caterpillar S3Q2)

Hours Max: 500

Coolant

Hours Max: 6000

Hydraulics

Months Max: 18
Hours Max: 3000

Final Drives (each)

Hours Max: 1000