Your selected equipment
- Make
- CATERPILLAR
- Model
- 301.8C (Mini Hydraulic Excavators)
- Engine
- D
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (D) (Mitsubishi L3E NA 14kW) |
Premium
|
Maxtron DEO SAE 10W-30
(a, b, c, d, e)
|
1.08
|
||
Mainline |
Superlube TMS SAE 10W-30
|
||||
Transmission |
From Hydraulics
|
|
|||
Final Drives (each) |
Ultra Premium
|
Maxtron GL 75W-140
(f, g, h, i)
|
0.053
|
||
Premium |
MP Gear Lube SAE 85W-140
|
||||
Coolant |
Refer to Technical
|
2.11
|
|||
Hydraulics |
Indol EH ISO 46
(j, k, l, m, n)
|
9.25
|
|||
Grease Points |
Maxtron EP NLGI 2
|
|
Engine (D) (Mitsubishi L3E NA 14kW)
Recommendation:
Premium
Maxtron DEO SAE 10W-30
Mainline
Superlube TMS SAE 10W-30
Capacity 1.08(gal)
Transmission
Recommendation:
From Hydraulics
Final Drives (each)
Recommendation:
Ultra Premium
Maxtron GL 75W-140
Premium
MP Gear Lube SAE 85W-140
Capacity 0.053(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.11(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- -4°F to 104°F
- c.
- Alternative recommendations, -40°F to 104°F: Refer to Technical
- d.
- Alternative recommendations, -22°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
- e.
- Alternative recommendations, 14°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
- f.
- 14°F to 122°F
- g.
- Alternative recommendations, -22°F to 104°F: Maxtron Enviro-EDGE GL 75W-90
- h.
- Alternative recommendations, -4°F to 104°F: Maxtron Enviro-EDGE GL 75W-90 / MP Gear Lube SAE 80W-90
- i.
- Alternative recommendations, 32°F to 104°F: Maxtron Enviro-EDGE GL 75W-90 / MP Gear Lube SAE 80W-90
- j.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- k.
- 23°F to 113°F
- l.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- m.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- n.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
Oil Change Intervals
Engine (D) (Mitsubishi L3E NA 14kW)
- Hours Max
- 500
Final Drives (each)
- Hours Max
- 1000
Coolant
- Hours Max
- 6000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000