Your selected equipment
- Make
- CATERPILLAR
- Model
- 215B (Tracked Excavators B Series)
- Engine
- DT
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a)
|
4.23
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
From Hydraulics
|
|
|||
Final Drives (each) |
Power Transmission Fluid SAE 50
(c, d, e, f, g)
|
3.96 / 3.04
(b)
|
|||
Coolant |
Refer to Technical
|
7.13
|
|||
Hydraulics |
Indol EH ISO 46
(h, i, j, k, l)
|
40.9
|
|||
Clamshell Rotor Gear Drive |
Ultra Premium
|
Superlube 518 Diesel Engine Oil SAE 40
|
0.238
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Pump Drive |
Premium
|
Maxtron DEO SAE 15W-40
|
1.59
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Swing Gearbox |
Power Transmission Fluid SAE 50
(m, n, o, p, q)
|
5.28
|
Engine (DT)
Capacity 4.23(gal)
Transmission
Recommendation:
From Hydraulics
Final Drives (each)
Capacity 3.96 / 3.04(gal)
(b)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 7.13(gal)
Clamshell Rotor Gear Drive
Recommendation:
Ultra Premium
Superlube 518 Diesel Engine Oil SAE 40
Mainline
Superlube TMS SAE 15W-40
Capacity 0.238(gal)
Pump Drive
Capacity 1.59(gal)
Swing Gearbox
Capacity 5.28(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Standard/special application
- c.
- 5°F to 122°F
- d.
- Alternative recommendations, -22°F to 77°F: Maxtron Power Transmission Fluid MV
- e.
- Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
- f.
- Alternative recommendations, -13°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
- g.
- Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
- h.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- i.
- 23°F to 113°F
- j.
- Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- k.
- Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
- l.
- Alternative recommendations, 32°F to 122°F: Refer to Technical
- m.
- 5°F to 122°F
- n.
- Alternative recommendations, -22°F to 77°F: Maxtron Power Transmission Fluid MV
- o.
- Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
- p.
- Alternative recommendations, -13°F to 95°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
- q.
- Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
Oil Change Intervals
Engine (DT)
- Hours Max
- 500
Final Drives (each)
- Months Max
- 12
- Hours Max
- 2000
Coolant
- Months Max
- 24
- Hours Max
- 2000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000
Clamshell Rotor Gear Drive
- Months Max
- 12
- Hours Max
- 1000
Pump Drive
- Hours Max
- 250
Swing Gearbox
- Months Max
- 6
- Hours Max
- 1000