Close Print

Maxtron DEO SAE 15W-40

Make
BANTAM
Model
C475 (Cummins) (Tracked)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT)
Premium
 Maxtron DEO SAE 15W-40 (a, b)
Mainline
 Superlube TMS SAE 15W-40
Coolant
Refer to Technical
Hydraulics
Ultra Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 46 (c, d, e)
Premium
 Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV
Mainline
 Indol EH ISO 46
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Chain Cases
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Final Drive Reduction Hubs (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Linkage Pins
Premium
 Maxtron DEO SAE 15W-40
Mainline
 Superlube TMS SAE 15W-40
Pump Drive Gearbox
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Rear Tumbler Inner Bearings
Ultra Premium
 Superlube 518 Diesel Engine Oil SAE 30
Mainline
 Superlube TMS SAE 10W-30
Rear Tumbler Outer Bearings
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Swing Gearbox
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
Premium
 MP Gear Lube SAE 80W-90
Swing Pinion & Turntable Gears
Refer to Technical
Turntable Bearing
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, -13°F to 68°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
b.
Alternative recommendations, >0°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
c.
Alternative recommendations, 5°F to 180°F: Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Hydrostatic Fluid ISO 46 MV / Indol Premium Anti-Wear Hydraulic Oil ISO 32
d.
Alternative recommendations, 16°F to 199°F: Indol Premium Anti-Wear Hydraulic Oil ISO 46 / Indol Premium Anti-Wear Hydraulic Oil ISO 32 MV / Indol EH ISO 46
e.
Alternative recommendations, 25°F to 199°F: Hydrostatic Fluid ISO 46 MV

Oil Change Intervals

Engine (DT)
Months Max
3
Hours Max
250
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Months Max
6
Chain Cases
Months Max
12
Final Drive Reduction Hubs (each)
Months Max
12
Pump Drive Gearbox
Hours Max
500
Rear Tumbler Inner Bearings
Hours Max
500
Rear Tumbler Outer Bearings
Hours Max
500
Swing Gearbox
Months Max
12
Turntable Bearing
Hours Max
100