Close Print

Maxtron DEO SAE 15W-40

Make
DRESSER
Model
TD-15C (Cummins) (Tracked Bulldozers)
Engine
DT
Application
Recommendation
Capacity (gal)
Engine (DT)
Premium
 Maxtron DEO SAE 15W-40 (a, b)
Mainline
 Superlube TMS SAE 15W-40
Transmission
Superlube 518 Diesel Engine Oil SAE 10W (c, d)
Hydraulics
Superlube 518 Diesel Engine Oil SAE 10W (c, e)
Grease Points
Maxtron EP NLGI 2
Final Drives
Ultra Premium
 Maxtron GL 75W-140 (f, g)
Premium
 MP Gear Lube SAE 85W-140
Pivot Shaft Housing
Ultra Premium
 Maxtron GL 75W-140
Premium
 MP Gear Lube SAE 85W-140
Track Rollers & Idlers
  (h)

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations, Cummins, -13°F to 68°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
b.
Alternative recommendations, Cummins, >14°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
c.
Fluid must meet Allison C3 & CAT TO-2
d.
Alternative recommendations, -29°F to 10°F: Refer to Technical
e.
Alternative recommendations, -29°F to 10°F: Refer to Technical
f.
Channel point must not exceed -34°C for SAE 80W-90 when used below -20°C.
g.
Alternative recommendations, -29°F to -6°F: Maxtron Enviro-EDGE GL 75W-90 / MP Gear Lube SAE 80W-90
h.
Permanently lubricated with CD 30 engine oil. Only require lubrication when reconditioned

Oil Change Intervals

Engine (DT)
Hours Max
200
Transmission
Months Max
6
Hours Max
1000
Hydraulics
Hours Max
2000
Final Drives
Hours Max
1000
Pivot Shaft Housing
Hours Max
1000