Maxtron DEO SAE 15W-40

Make: CATERPILLAR
Model: D4H Series II (Wheeled Bulldozers)
Engine: DT

Application	Recommendation
Engine (DT) (Cat 3204)	Premium	Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g)
Engine (DT) (Cat 3204)	Mainline	Superlube TMS SAE 15W-40
Transmission	Premium	Maxtron Power Transmission Fluid MV
Transmission	Mainline	Power Transmission Fluid SAE 30
Final Drives (each)	Premium	Maxtron Power Transmission Fluid MV (h, i, j, k, l, m, n)
Final Drives (each)	Mainline	Power Transmission Fluid SAE 30
Coolant	Refer to Technical
Hydraulics	Indol EH ISO 46 (o, p, q, r, s)
Greases: Molybdenum	Maxtron EP NLGI 2
Greases: Multipurpose	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)	Poly-Xtreme NLGI 2

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -40°F to 86°F: Refer to Technical
c.: Alternative recommendations, -40°F to 50°F: Refer to Technical
d.: Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, -22°F to 86°F: Refer to Technical
f.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
g.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
h.: Alternative recommendations, -40°F to 32°F: Refer to Technical
i.: Alternative recommendations, -40°F to 14°F: Refer to Technical
j.: Alternative recommendations, -22°F to 50°F: Power Transmission Fluid SAE 10W
k.: Alternative recommendations, -22°F to 32°F: Refer to Technical
l.: Alternative recommendations, -13°F to 59°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
m.: Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
n.: Alternative recommendations, 14°F to 122°F: Refer to Technical
o.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
p.: 23°F to 113°F
q.: Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
r.: Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
s.: Alternative recommendations, 32°F to 122°F: Refer to Technical

Oil Change Intervals

Engine (DT) (Cat 3204)

Hours Max: 250

Transmission

Months Max: 6
Hours Max: 1000

Final Drives (each)

Months Max: 12
Hours Max: 2000

Coolant

Months Max: 24
Hours Max: 2000

Hydraulics

Months Max: 18
Hours Max: 3000