Maxtron DEO SAE 15W-40

Make: CATERPILLAR
Model: D11N (Tracked Bulldozers)
Engine: DT

Application	Recommendation		Capacity (gal)
Engine (DT) (Cat 3508TA)	Premium	Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g)	34.1
Engine (DT) (Cat 3508TA)	Mainline	Superlube TMS SAE 15W-40	34.1
Transmission	Premium	Maxtron Power Transmission Fluid MV	74.8
Transmission	Mainline	Power Transmission Fluid SAE 30	74.8
Final Drives (each)	Premium	Maxtron Power Transmission Fluid MV (h, i, j, k, l, m, n)	6.6
Final Drives (each)	Mainline	Power Transmission Fluid SAE 30	6.6
Coolant	Refer to Technical		56.8
Hydraulics	Indol EH ISO 46 (o, p, q, r, s)		84.3
Greases: Molybdenum	Maxtron EP NLGI 2
Greases: Multipurpose	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)	Poly-Xtreme NLGI 2
Pivot Shaft	Power Transmission Fluid SAE 50 (t, u, v, w, x, y)		13.5
Recoil Spring Case (each)	Power Transmission Fluid SAE 50 (z, aa, bb, cc, dd, ee)		24.8

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -40°F to 86°F: Refer to Technical
c.: Alternative recommendations, -40°F to 50°F: Refer to Technical
d.: Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, -22°F to 86°F: Refer to Technical
f.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
g.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
h.: Alternative recommendations, -40°F to 32°F: Refer to Technical
i.: Alternative recommendations, -40°F to 14°F: Refer to Technical
j.: Alternative recommendations, -22°F to 50°F: Power Transmission Fluid SAE 10W
k.: Alternative recommendations, -22°F to 32°F: Refer to Technical
l.: Alternative recommendations, -13°F to 59°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
m.: Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
n.: Alternative recommendations, 14°F to 122°F: Refer to Technical
o.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
p.: 23°F to 113°F
q.: Alternative recommendations, -4°F to 104°F: Refer to Technical; Power Transmission Fluid SAE 10W; Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
r.: Alternative recommendations, 5°F to 122°F: Maxtron Power Transmission Fluid MV
s.: Alternative recommendations, 32°F to 122°F: Refer to Technical
t.: Alternative recommendations, Recoil Spring and Pivot Shaft, -40°F to 50°F: Refer to Technical
u.: Alternative recommendations, Recoil Spring and Pivot Shaft, -40°F to 32°F: Refer to Technical
v.: Alternative recommendations, Recoil Spring and Pivot Shaft, -22°F to 32°F: Refer to Technical; Power Transmission Fluid SAE 10W
w.: Alternative recommendations, Recoil Spring and Pivot Shaft, -4°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
x.: Alternative recommendations, Recoil Spring and Pivot Shaft, 14°F to 104°F: Refer to Technical
y.: Alternative recommendations, Recoil Spring and Pivot Shaft, 32°F to 122°F: Power Transmission Fluid SAE 50
z.: Alternative recommendations, Recoil Spring and Pivot Shaft, -40°F to 50°F: Refer to Technical
aa.: Alternative recommendations, Recoil Spring and Pivot Shaft, -40°F to 32°F: Refer to Technical
bb.: Alternative recommendations, Recoil Spring and Pivot Shaft, -22°F to 32°F: Refer to Technical; Power Transmission Fluid SAE 10W
cc.: Alternative recommendations, Recoil Spring and Pivot Shaft, -4°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
dd.: Alternative recommendations, Recoil Spring and Pivot Shaft, 14°F to 104°F: Refer to Technical
ee.: Alternative recommendations, Recoil Spring and Pivot Shaft, 32°F to 122°F: Power Transmission Fluid SAE 50

Oil Change Intervals

Engine (DT) (Cat 3508TA)

Hours Max: 250

Transmission

Months Max: 6
Hours Max: 1000

Final Drives (each)

Months Max: 3
Hours Max: 500

Coolant

Months Max: 24
Hours Max: 2000

Hydraulics

Months Max: 18
Hours Max: 3000

Pivot Shaft

Hours Max: 1000

Recoil Spring Case (each)

Hours Max: 1000