Maxtron DEO SAE 15W-40

Application	Recommendation		Capacity (gal)
Engine (D)	Premium	Maxtron DEO SAE 15W-40 (a, b)	7.27
Engine (D)	Mainline	Superlube TMS SAE 15W-40	7.27
Transmission	Premium	Maxtron Power Transmission Fluid MV	20.6
Transmission	Mainline	Power Transmission Fluid SAE 30	20.6
Final Drives (each)	Power Transmission Fluid SAE 50 (c, d, e, f, g, h, i, j)		2.91
Coolant	Refer to Technical (k)		8.98
Hydraulics	Premium	Maxtron DEO SAE 10W-30 (l, m, n)	11.6
Hydraulics	Mainline	Superlube TMS SAE 10W-30	11.6
Greases: Molybdenum	Maxtron EP NLGI 2
Greases: Multipurpose	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)	Poly-Xtreme NLGI 2
Midroller hubs	Premium	Maxtron Power Transmission Fluid MV
Midroller hubs	Mainline	Power Transmission Fluid SAE 30
Pivot joint (where fitted)	Ultra Premium	Maxtron Enviro-EDGE GL 75W-90
Pivot joint (where fitted)	Premium	MP Gear Lube SAE 80W-90
Steering control mechanism (where fitted)	Superlube 518 Diesel Engine Oil SAE 10W
Winch (where fitted)	Premium	Maxtron Power Transmission Fluid MV
Winch (where fitted)	Mainline	Power Transmission Fluid SAE 30

There are no notes to display for this model

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
c.: Factory fill viscosity: 50
d.: Alternative recommendations, -40°F to 50°F: Refer to Technical
e.: Alternative recommendations, -40°F to 32°F: Refer to Technical
f.: Alternative recommendations, -22°F to 50°F: Refer to Technical
g.: Alternative recommendations, -22°F to 32°F: Power Transmission Fluid SAE 10W
h.: Alternative recommendations, -13°F to 77°F: Maxtron Power Transmission Fluid MV / Power Transmission Fluid SAE 30
i.: Alternative recommendations, 5°F to 122°F: Power Transmission Fluid SAE 50
j.: Alternative recommendations, 14°F to 122°F: Refer to Technical
k.: Mix ratio, 50%
l.: Hydraulics/hydrostatic system
m.: Alternative recommendations, Hydraulics/hydrostatic system: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
n.: Alternative recommendations: Refer to Technical