Close Print

Maxtron DEO SAE 15W-40

Make
CATERPILLAR
Model
RT50 (Telescopic Handlers)
Engine
DT
Year
2005-
Application
Recommendation
Capacity (gal)
Engine (DT) (Perkins 4.236)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g)
2.64
Mainline
 Superlube TMS SAE 15W-40
Rear Axle
Qwiklift HTB
2.38
Transfer Drive
Premium
 Maxtron Power Transmission Fluid MV
0.793
Mainline
 Power Transmission Fluid SAE 30
Transmission
Premium
 Maxtron Power Transmission Fluid MV
3.43
Mainline
 Power Transmission Fluid SAE 30
Front Axle
Qwiklift HTB
2.38
Coolant
Refer to Technical
4.23
Brake System
Refer to Technical
Hydraulics
Refer to Technical
66.0
Reduction Hubs (each)
Qwiklift HTB
0.528

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Alternative recommendations, -40°F to 86°F: Refer to Technical
c.
Alternative recommendations, -40°F to 50°F: Refer to Technical
d.
Alternative recommendations, -22°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.
Alternative recommendations, -22°F to 86°F: Refer to Technical
f.
Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
g.
Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40

Oil Change Intervals

Engine (DT) (Perkins 4.236)
Hours Max
250
Rear Axle
Hours Max
1000
Transfer Drive
Months Max
12
Hours Max
1000
Transmission
Months Max
12
Hours Max
1000
Front Axle
Hours Max
1000
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Months Max
24
Hours Max
2000
Reduction Hubs (each)
Months Max
12
Hours Max
1000