Maxtron DEO SAE 15W-40

Lubricant / Capacity Notes

a.

Oil change interval can be extended using John Deere PLUS-50 or E6/E7 with specified John Deere filters: fuel sulphur level <0.1%, 375 hours with standard oil pan, 500 hours withextended drain oil pan; fuel sulphur 0.1% to 0.5%, 250 hours; fuel sulphur 0.5% to 1% 150 hours

b.

Oil drain interval using CI-4, E4 or E5: fuel sulphur level < 0.1%, 250 hours; fuel sulphur 0.1% to 0.5%, 150 hours; fuel sulphur 0.5% to 1%, 100 hours

c.

During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use

d.

Alternative recommendations, -40°F to 122°F: Refer to Technical

e.

Alternative recommendations, -22°F to 104°F: Refer to Technical

f.

Alternative recommendations, -13°F to 122°F: Maxtron Enviro-Edge SAE 5W-40

g.

Alternative recommendations, -13°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30

h.

Alternative recommendations, -4°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40

i.

Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use Refer to Technical at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to Refer to TechnicalTM D5345 (pre-diluted) or Refer to TechnicalTM D4985 (concentrate) plus supplemental coolant additives