• Search Again
  • Print
  • Send Via Email

Your selected equipment


Make
JOHN DEERE
Model
4024T (PowerTech Series)
Engine
DT

Application
Recommendation
Capacity (gal)
Data Sheet
Sales Sheet
Engine (DT)
Premium
Maxtron DEO SAE 15W-40
(a, b)
PDS
Mainline
Superlube TMS SAE 15W-40
PDS
Coolant
Refer to Technical
(c)
Engine (DT)
Recommendation:
Premium Maxtron DEO SAE 15W-40
Mainline Superlube TMS SAE 15W-40
(a, b)
Coolant
Recommendation:
Ultra Premium Refer to Technical
(c)

General Notes

1.
Fuel sulphur content greater than 0.5% results in oil change intervals reduced by half

Lubricant / Capacity Notes

a.
During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use
b.
Multigrade engine oils are preferred. Synthetic engine oils are also suitable
c.
Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use Refer to Technical at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to Refer to TechnicalTM D5345 (pre-diluted) or Refer to TechnicalTM D4985 (concentrate) plus supplemental coolant additives

Oil Change Intervals

There is no Oil Change Interval data to display for this model