Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
DEUTZ
Model
F4L913 (B/FL 913 Built-In & Marine Engines)
Engine
D
Year
2005-
Application
Recommendation
Capacity (gal)
Engine (D)
Maxtron Enviro-Edge SAE 5W-40 (a, c)
(b)
Coolant
AIR

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Also recommended
b.
Turbocharged engines with uprated power, and engines with high loading must use Deutz Oil TLX 10W40FE: 1013FC, 1015CP, all engines in CHP plants or gensets operating in parallel with the mains/with each other, engines in combines with: 1012, 1013, 2013, 1015, BF6L913C-176 kW at 2500/min, engines 2012/C with uprated power as of level ll of exhaust emission legislation for mobile machinery, engines BF4M2012 > 95kW, BF6M2012 >143 kW with cylinder bore diameter of 101mm or 98mm with MVS system, BF6M2012 >135 kW with a cylinder bore of 98mm with mechanical injection system. If unavailable, a list of other approved brands is available from Deutz, reference 0199-99-3002. These oils meet the MTU laboratory test, MTV 5040
c.
Alternative recommendations: 23°F to >86°F, E3/E5/E7 20W-50; 5°F to >86°F, Maxtron Enviro-Edge SAE 5W-40 / Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40; -4°F to >86°F, Maxtron Enviro-Edge SAE 5W-40; -4°F to 86°F, Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; -22°F to >86°F, Maxtron Enviro-Edge SAE 5W-40; -22°F to 86°F, E3/E5/E7 5W-30; <-22°F to >86°F, E3/E5/E7 0W-40; <-22°F to 86°F, E3/E5/E7 0W-30

Oil Change Intervals

Engine (D)
Hours Max
250