Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
VALTRA incl. VALMET
Model
N163 Direct (N3-Series)
Engine
D
Year
2012-
Application
Recommendation
Capacity (gal)
Engine (D) (49AWI, 120kw)
Maxtron Enviro-Edge SAE 5W-40 (a)
4.62
Transmission (Powershuttle)
Qwiklift HTB
17.2
Front Axle Differential
Refer to Technical
1.82 - 2.09
Coolant
Refer to Technical (b)
5.02
Power Steering
From Hydraulics
Hydraulics
Hydrostatic Fluid ISO 46 MV (c)
16.4
Grease Points
Ultra Premium
 Maxtron FS NLGI 2 (d)
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Front PTO
Maxtron All-Syn HD ATF
0.528
Front Wheel Reduction Gears (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90
0.211 - 0.528
Premium
 MP Gear Lube SAE 80W-90
Rear PTO
From Hydraulics
Rear Wheel Reduction Gears
From Transmission

General Notes

1.
2005, 2105 models: 'TRAC-TROL' and Servosystem: Superlube 518 Diesel Engine Oil SAE 10W / Auto Gold Multi-Vehicle ATF / Power Transmission Fluid SAE 10W or, after flushing: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
2.
Maxtron THF + / Circle 3 STOU SAE 15W-40 may be used in all applications (for hydraulics, 10W-30 grades only) except those models requiring a limited slip oil for front axles and hubs

Lubricant / Capacity Notes

a.
-13°F to 104°F
b.
Mix ratio, 50%
c.
Alternative recommendations: Refer to Technical
d.
Alternative recommendations: Refer to Technical; Maxtron EP NLGI 2

Oil Change Intervals

Engine (D) (49AWI, 120kw)
Hours Min
250
Hours Max
500
Transmission (Powershuttle)
Hours Max
2000
Front Axle Differential
Hours Max
1000
Coolant
Months Max
24
Hydraulics
Hours Max
1000
Front PTO
Hours Max
500
Front Wheel Reduction Gears (each)
Hours Max
1000