Close Print

Maxtron DEO SAE 15W-40

Make
JOHN DEERE
Model
8530 ILS (8 Series)
Engine
DT
Year
2005-
Application
Recommendation
Capacity (gal)
Engine (DT)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d, e, f)
7.4
Mainline
 Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Coolant
Refer to Technical (g)
10.6
Hydraulics
Ultra Premium
 Maxtron THF + (h, i)
39.6
Premium
 Qwiklift HTB
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 ML 365 Grease EP NLGI 2
Suspension Unit
From Transmission
Wheel Hubs (each)
Ultra Premium
 Maxtron Enviro-EDGE GL 75W-90 (j, k, l, m)
0.898
Premium
 MP Gear Lube SAE 80W-90

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
-4°F to 122°F
b.
Alternative recommendations, -40°F to 122°F: Refer to Technical
c.
Alternative recommendations, -22°F to 104°F: Refer to Technical
d.
Alternative recommendations, -13°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
e.
Alternative recommendations, -13°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
f.
Alternative recommendations, 32°F to 104°F: Superlube TMS SAE 10W-30
g.
Mix ratio, 50%
h.
-13°F to 68°F
i.
Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
j.
-13°F to 104°F
k.
Alternative recommendations, -40°F to 104°F: Maxtron Enviro-EDGE GL 75W-90
l.
Alternative recommendations, -13°F to 122°F: Maxtron GL 75W-140
m.
Alternative recommendations, 14°F to 122°F: Maxtron GL 75W-140 / MP Gear Lube SAE 85W-140

Oil Change Intervals

Engine (DT)
Hours Max
250
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Hours Max
1500
Wheel Hubs (each)
Hours Max
1000