Close Print

Maxtron DEO SAE 15W-40

Make: JOHN DEERE
Model: 7610
Engine: DT
Year: 2003-

Application	Recommendation		Capacity (gal)
Engine (DT)	Premium	Maxtron DEO SAE 15W-40 (a, b, c, d, e)	5.02
Engine (DT)	Mainline	Superlube TMS SAE 15W-40	5.02
Transmission	Ultra Premium	Maxtron THF + (f, g)	23.0 - 27.0
Transmission	Premium	Qwiklift HTB	23.0 - 27.0
Front Axle	Ultra Premium	Maxtron THF +	3.8
Front Axle	Premium	Qwiklift HTB	3.8
Coolant	Refer to Technical (h)		6.34
Hydraulics	From Transmission
Front Hubs (each)	Ultra Premium	Maxtron THF +	0.502 - 1.0
Front Hubs (each)	Premium	Qwiklift HTB	0.502 - 1.0
Grease Points	Ultra Premium	Maxtron FS NLGI 2
	Premium	Maxtron EP NLGI 2
	Mainline	Blue Gard 500+ NLGI 2
Front PTO	Ultra Premium	Maxtron THF +
Front PTO	Premium	Qwiklift HTB

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: The use of Refer to Technical / E4+E5 oils with John Deere filter allows oil drain interval to be increased by 50%
b.: Alternative recommendations, -40°F to 104°F: Refer to Technical
c.: Alternative recommendations, -22°F to 86°F: Refer to Technical
d.: Alternative recommendations, -4°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
f.: -13°F to 122°F
g.: Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
h.: Mix ratio, 50%

Oil Change Intervals

Engine (DT)

Hours Min: 250
Hours Max: 375

Transmission

Hours Max: 1500

Front Axle

Hours Max: 1500

Coolant

Months Max: 24
Hours Max: 2000

Front Hubs (each)

Hours Max: 1500

Front PTO

Hours Max: 1500