Close Print

Maxtron DEO SAE 15W-40

Make
JOHN DEERE
Model
6403 (Tier2)
Engine
DT
Year
2002-
Application
Recommendation
Capacity (gal)
Engine (DT) (4045T)
Premium
Maxtron DEO SAE 15W-40 (a, b, c, d, e, f, g, h)
3.17
Mainline
Superlube TMS SAE 15W-40
Transmission
From Hydraulics
Coolant
Refer to Technical (i)
3.57
Hydraulics
Ultra Premium
Maxtron THF + (j, k)
15.3
Premium
Qwiklift HTB
Grease Points
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
ML 365 Grease EP NLGI 2
MFWD Axle
Ultra Premium
Maxtron THF + (l, m)
1.32
Premium
Qwiklift HTB
Wheel Hubs (each)
Ultra Premium
Maxtron THF + (n, o)
0.211
Premium
Qwiklift HTB

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
The use of Refer to Technical / E4+E5 oils with John Deere filter allows oil drain interval to be increased by 50%
b.
Engine oil drain interval can be increased to 500 hours if John Deere Plus-50 / E4+E5 oil with John Deere filters are used
c.
Alternative recommendations, -40°F to 122°F: Refer to Technical
d.
Alternative recommendations, -22°F to 104°F: Refer to Technical
e.
Alternative recommendations, -13°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
f.
Alternative recommendations, -13°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
g.
Alternative recommendations, -4°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
h.
Alternative recommendations, 32°F to 104°F: Superlube TMS SAE 10W-30
i.
Mix ratio, 50%
j.
-13°F to 122°F
k.
Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
l.
-13°F to 122°F
m.
Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
n.
-13°F to 122°F
o.
Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis

Oil Change Intervals

Engine (DT) (4045T)
Hours Max
200
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Hours Max
1500
MFWD Axle
Hours Max
1000
Wheel Hubs (each)
Hours Max
1000