Close Print

Maxtron DEO SAE 15W-40

Make
JOHN DEERE
Model
6010SE
Engine
D
Year
2000-
Application
Recommendation
Capacity (gal)
Engine (D)
Premium
 Maxtron DEO SAE 15W-40 (a, b, c, d, e)
3.17
Mainline
 Superlube TMS SAE 15W-40
Transmission
Ultra Premium
 Maxtron THF + (g, h)
12.9 - 13.7 (f)
Premium
 Qwiklift HTB
Front Axle
Ultra Premium
 Maxtron THF +
1.32 - 2.8
Premium
 Qwiklift HTB
Coolant
Refer to Technical (i)
3.57
Hydraulics
From Transmission
Front Hubs (each)
Ultra Premium
 Maxtron THF +
0.211 - 0.528
Premium
 Qwiklift HTB
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 ML 365 Grease EP NLGI 2
Front PTO gearbox
Ultra Premium
 Maxtron THF +
0.925
Premium
 Qwiklift HTB
Hydraulic clutch actuation
Refer to Technical
Rear Hubs
From Transmission

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
The use of Refer to Technical / E4+E5 oils with John Deere filter allows oil drain interval to be increased by 50%
b.
Alternative recommendations, -40°F to 104°F: Refer to Technical
c.
Alternative recommendations, -22°F to 86°F: Refer to Technical
d.
Alternative recommendations, -4°F to 104°F: Maxtron Enviro-Edge SAE 5W-40
e.
Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
f.
Transmission capacity alternatives: PowrQuad Plus (16/16), 49 ltr. PowrQuad Plus and AutoQuad Plus (24/24), 50 ltr. AutoPowr Transmission, 60 ltr. With creep transmission, add 1 ltr, Front Wheel Drive, add 3 ltr, TLS axle, add 3 ltr
g.
-13°F to 122°F
h.
Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
i.
Mix ratio, 50%

Oil Change Intervals

Engine (D)
Hours Min
250
Hours Max
500
Transmission
Hours Max
1200
Front Axle
Months Max
24
Hours Max
1500
Coolant
Months Max
24
Hours Max
2000
Front Hubs (each)
Hours Max
750
Front PTO gearbox
Months Max
24
Hours Max
1500
Hydraulic clutch actuation
Months Max
24