Close Print

Maxtron Enviro-Edge SAE 5W-40

Make
HURLIMANN
Model
XM 110 (XM)
Engine
D / DT
Application
Recommendation
Capacity (gal)
Engine (D / DT) (without/with filter)
Maxtron Enviro-Edge SAE 5W-40 (a)
2.38 / 2.64
Rear Axle (Brake Lubricant - Fill to MAX)
Ultra Premium
 Maxtron Multi- Vehicle ATF Low Vis
Premium
 Auto Gold Multi-Vehicle ATF
Mainline
 Maxtron All-Syn HD ATF
Transmission (& Rear Axle Oil Main/Auxiliary)
Ultra Premium
 Maxtron THF +
15.3 / 10.6
Premium
 Qwiklift HTB
Transmission (& Rear Sprung Axle Oil Main/Auxiliary)
Ultra Premium
 Maxtron THF +
16.1 / 11.1
Premium
 Qwiklift HTB
Front Axle
Refer to Technical (b)
2.25
Coolant
Refer to Technical (c)
5.55
Hydraulics
From Transmission
Grease Points
Ultra Premium
 Maxtron FS NLGI 2
Premium
 Maxtron EP NLGI 2
Mainline
 Blue Gard 500+ NLGI 2
Front Axle Side Gears (each)
Refer to Technical (d)
0.476
Front PTO
Ultra Premium
 Maxtron THF +
0.238
Premium
 Qwiklift HTB
Rear Lift (Hydraulic lift Auxiliaries & Hydrosteering oil)
Ultra Premium
 Maxtron THF +
11.4
Premium
 Qwiklift HTB

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations: Maxtron Enviro-Edge SAE 5W-40
b.
Alternative recommendations: Refer to Technical
c.
Mix ratio, 50% >-37°C
d.
Alternative recommendations: Refer to Technical

Oil Change Intervals

Engine (D / DT) (without/with filter)
Hours Max
250
Rear Axle (Brake Lubricant - Fill to MAX)
Months Max
24
Transmission (& Rear Axle Oil Main/Auxiliary)
Hours Max
1000
Transmission (& Rear Sprung Axle Oil Main/Auxiliary)
Hours Max
1000
Front Axle
Hours Max
1000
Coolant
Months Max
24
Front Axle Side Gears (each)
Hours Max
1000
Front PTO
Hours Max
500