Your selected equipment
- Make
- CASE IH
- Model
- Steiger STX 425 (Steiger STX)
- Engine
- D
- Year
- 2001-2005
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
|---|---|---|---|---|---|
Engine (D) |
Premium
|
Maxtron DEO SAE 15W-40
(a)
|
13.0
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Ultra Premium
|
Maxtron THF +
|
13.0 / 13.5
|
||
Premium |
Qwiklift HTB
|
||||
Coolant |
Refer to Technical
(b)
|
21.2
|
|||
Hydraulics |
Ultra Premium
|
Maxtron THF +
|
34.9 - 80.0
|
||
Premium |
Qwiklift HTB
|
||||
Front Hubs |
Refer to Technical
|
|
|||
Grease Points |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Roller Bearings |
Refer to Technical
|
0.079
|
|||
Tension Control |
Refer to Technical
|
0.106
|
|||
Engine (D)
Capacity 13.0(gal)
Transmission
Capacity 13.0 / 13.5(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 21.2(gal)
Hydraulics
Capacity 34.9 - 80.0(gal)
Front Hubs
Recommendation:
Ultra Premium
Refer to Technical
Grease Points
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Roller Bearings
Recommendation:
Ultra Premium
Refer to Technical
Capacity 0.079(gal)
Tension Control
Recommendation:
Ultra Premium
Refer to Technical
Capacity 0.106(gal)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Engine oil viscosity recommendations: below -30°C to -5°C, 5W-20/5W-30; -25°C to 30°C, 10W-30/10W-40; -15°C to 45°C, 15W-40; Monograde oils: -20°C to 0°C, 10W; -9°C to 21°C, 20W-20; -1°C to 36°C, 30; above 10°C, 40.
- b.
- Mix ratio, 50%
Oil Change Intervals
Engine (D)
- Hours Min
- 250
- Hours Max
- 500
Transmission
- Hours Max
- 1000
Coolant
- Months Max
- 24
- Hours Max
- 2000
Hydraulics
- Hours Max
- 1000
Front Hubs
- Hours Max
- 1000