Your selected equipment
- Make
- MASSEY FERGUSON
- Model
- MF 274C
- Engine
- D
- Year
- 1983-
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (D) |
Refer to Technical
(a, b, c)
|
2.4
|
|||
Transmission |
Refer to Technical
(d)
|
3.7
|
|||
Final Drives (each) |
Refer to Technical
(d)
|
1.06
|
|||
Coolant |
Refer to Technical
(e)
|
3.96
|
|||
Hydraulics |
From Transmission
|
|
|||
Grease Points |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Blue Gard 500+ NLGI 2
|
||||
Mainline |
ML 365 Grease EP NLGI 2
|
||||
Auxiliary hydraulic control system (where fitted) |
Ultra Premium
|
Maxtron Multi- Vehicle ATF Low Vis
|
|
||
Premium |
Auto Gold Multi-Vehicle ATF
|
||||
Mainline |
Maxtron ATF SS8
|
||||
Idler wheels & track rollers |
Refer to Technical
|
|
Engine (D)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 2.4(gal)
Transmission
Recommendation:
Ultra Premium
Refer to Technical
Capacity 3.7(gal)
Final Drives (each)
Recommendation:
Ultra Premium
Refer to Technical
Capacity 1.06(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 3.96(gal)
Hydraulics
Recommendation:
From Transmission
Grease Points
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Blue Gard 500+ NLGI 2
Mainline
ML 365 Grease EP NLGI 2
Auxiliary hydraulic control system (where fitted)
Recommendation:
Ultra Premium
Maxtron Multi- Vehicle ATF Low Vis
Premium
Auto Gold Multi-Vehicle ATF
Mainline
Maxtron ATF SS8
Idler wheels & track rollers
Recommendation:
Ultra Premium
Refer to Technical
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Maxtron THF + / Circle 3 STOU SAE 10W-30 and CDSE are suitable for all engines
- b.
- Use only CC+SE oils in naturally aspirated engines during run-in and light load operation
- c.
- Alternative recommendations: Refer to Technical
- d.
- Maxtron THF + / Circle 3 STOU SAE 10W-30 and Maxtron THF + / Qwiklift HTB are suitable for all transmissions and final drives
- e.
- Mix ratio, 33%
Oil Change Intervals
Engine (D)
- Hours Max
- 250
Transmission
- Hours Max
- 1000
Final Drives (each)
- Hours Max
- 1000
Coolant
- Months Max
- 24