Maxtron DEO SAE 15W-40

Application	Recommendation		Capacity (gal)
Engine (DT) (PowerTech Plus TMd/e 530 / 395 hp / kW)	Premium	Maxtron DEO SAE 15W-40 (a, b, c, d, e, f)	15.9
Engine (DT) (PowerTech Plus TMd/e 530 / 395 hp / kW)	Mainline	Superlube TMS SAE 15W-40	15.9
Transmission (120mm Double Reduction Axle)	Ultra Premium	Maxtron THF + (g, h)	23.0
Transmission (120mm Double Reduction Axle)	Premium	Qwiklift HTB	23.0
Axle	From Transmission
Coolant	Refer to Technical (i)		14.0
Hydraulics	Ultra Premium	Maxtron THF + (j, k)	27.2 - 30.9
Hydraulics	Premium	Qwiklift HTB	27.2 - 30.9
Grease Points	Ultra Premium	Maxtron FS NLGI 2 (l, m, n)
	Premium	Maxtron EP NLGI 2
	Mainline	Poly-Xtreme NLGI 2

There are no notes to display for this model

a.: 5°F to 122°F
b.: Alternative recommendations, -40°F to 122°F: Refer to Technical
c.: Alternative recommendations, -22°F to 104°F: Refer to Technical
d.: Alternative recommendations, -13°F to 122°F: Maxtron Enviro-Edge SAE 5W-40
e.: Alternative recommendations, -13°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
f.: Alternative recommendations, 5°F to 122°F: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
g.: -13°F to 122°F
h.: Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
i.: Mix ratio, 50%
j.: -13°F to 122°F
k.: Alternative recommendations, -40°F to 86°F: Maxtron THF + / Qwiklift HTB Low Vis
l.: 14°F to 122°F
m.: Alternative recommendations, -22°F to 50°F: Refer to Technical
n.: Alternative recommendations, -4°F to 86°F: HD Moly Xtreme NLGI 1 / Maxtron EP NLGI 1 / Molyplex 500+ EP NLGI 1