Your selected equipment
- Make
- CATERPILLAR
- Model
- Challenger 85D
- Engine
- D / DT
- Year
- 1996-1997
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (D / DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a, b)
|
8.98
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Premium
|
Maxtron Power Transmission Fluid MV
|
15.1
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Final Drives (each) |
Premium
|
Maxtron Power Transmission Fluid MV
(c)
|
55.2
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Coolant |
Refer to Technical
(d)
|
15.1 / 20.1
|
|||
Hydraulics |
Superlube 518 Diesel Engine Oil SAE 10W
(e)
|
32.0
|
|||
Front Idler Hubs |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Greases: Molybdenum |
Maxtron EP NLGI 2
|
|
|||
Greases: Multipurpose |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Greases: Special Purpose (high temp. antifriction bearings) |
Poly-Xtreme NLGI 2
|
|
|||
Midroller hubs |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Pivot joint (where fitted) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Steering control mechanism (where fitted) |
Superlube 518 Diesel Engine Oil SAE 10W
|
|
|||
Winch (where fitted) |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
Engine (D / DT)
Capacity 8.98(gal)
Transmission
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 15.1(gal)
Final Drives (each)
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 55.2(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 15.1 / 20.1(gal)
Hydraulics
Capacity 32.0(gal)
Front Idler Hubs
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Greases: Multipurpose
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)
Midroller hubs
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Pivot joint (where fitted)
Steering control mechanism (where fitted)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- c.
- Factory fill viscosity: 30
- d.
- Mix ratio, 50%
- e.
- Alternative recommendations, Hydraulics/hydrostatic system: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30; Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
Oil Change Intervals
Engine (D / DT)
- Hours Max
- 250
Transmission
- Hours Max
- 1000
Final Drives (each)
- Hours Max
- 1000
Coolant
- Hours Max
- 3000
Hydraulics
- Hours Max
- 1000