Your selected equipment
- Make
- CATERPILLAR
- Model
- Challenger 65
- Engine
- DT
- Year
- 1988-
Application |
Recommendation |
Capacity (gal) |
Data Sheet |
Sales Sheet |
|
---|---|---|---|---|---|
Engine (DT) |
Premium
|
Maxtron DEO SAE 15W-40
(a, b)
|
6.87
|
||
Mainline |
Superlube TMS SAE 15W-40
|
||||
Transmission |
Premium
|
Maxtron Power Transmission Fluid MV
|
17.7
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Final Drives (each) |
Premium
|
Maxtron Power Transmission Fluid MV
(c)
|
24.6
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Coolant |
Refer to Technical
(d)
|
11.1
|
|||
Brake Fluid |
Refer to Technical
|
|
|||
Hydraulics |
Premium
|
Maxtron DEO SAE 10W-30
(e, f, g)
|
16.1
|
||
Mainline |
Superlube TMS SAE 10W-30
|
||||
Front Idler Hubs |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Greases: Molybdenum |
Maxtron EP NLGI 2
|
|
|||
Greases: Multipurpose |
Ultra Premium
|
Maxtron FS NLGI 2
|
|
||
Premium |
Maxtron EP NLGI 2
|
||||
Mainline |
Blue Gard 500+ NLGI 2
|
||||
Greases: Special Purpose (high temp. antifriction bearings) |
Poly-Xtreme NLGI 2
|
|
|||
Midroller hubs |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
||||
Pivot joint (where fitted) |
Ultra Premium
|
Maxtron Enviro-EDGE GL 75W-90
|
|
||
Premium |
MP Gear Lube SAE 80W-90
|
||||
Steering control mechanism |
Refer to Technical
|
|
|||
Steering control mechanism (where fitted) |
Superlube 518 Diesel Engine Oil SAE 10W
|
|
|||
Winch (where fitted) |
Premium
|
Maxtron Power Transmission Fluid MV
|
|
||
Mainline |
Power Transmission Fluid SAE 30
|
Engine (DT)
Capacity 6.87(gal)
Transmission
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 17.7(gal)
Final Drives (each)
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Capacity 24.6(gal)
Coolant
Recommendation:
Ultra Premium
Refer to Technical
Capacity 11.1(gal)
Brake Fluid
Recommendation:
Ultra Premium
Refer to Technical
Hydraulics
Capacity 16.1(gal)
Front Idler Hubs
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Greases: Multipurpose
Recommendation:
Ultra Premium
Maxtron FS NLGI 2
Premium
Maxtron EP NLGI 2
Mainline
Blue Gard 500+ NLGI 2
Greases: Special Purpose (high temp. antifriction bearings)
Midroller hubs
Recommendation:
Premium
Maxtron Power Transmission Fluid MV
Mainline
Power Transmission Fluid SAE 30
Pivot joint (where fitted)
Steering control mechanism
Recommendation:
Ultra Premium
Refer to Technical
Steering control mechanism (where fitted)
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- Alternative recommendations, -4°F to 104°F: Maxtron DEO SAE 10W-30 / Superlube TMS SAE 10W-30
- c.
- Factory fill viscosity: 30
- d.
- Mix ratio, 50%
- e.
- Hydraulics/hydrostatic system
- f.
- Alternative recommendations, Hydraulics/hydrostatic system: Maxtron DEO SAE 15W-40 / Superlube TMS SAE 15W-40
- g.
- Alternative recommendations: Refer to Technical
Oil Change Intervals
Engine (DT)
- Hours Max
- 250
Transmission
- Hours Max
- 1000
Final Drives (each)
- Hours Max
- 1000
Coolant
- Hours Max
- 3000
Brake Fluid
- Months Max
- 24
Front Idler Hubs
- Hours Max
- 1000